BWT One shot

BWT ONE SHOT BWT ONE SHOT IS A LIQUID COMPOUND. IT CONTAINS A COMBINATION OF ALKALINE MINERAL SALTS, SEQUESTERING AGENTS, SLUDGE CONDITIONERS, SCALE AND CORROSION INHIBITORS

FEATURES & BENEFITS:

• Specially formulated liquid treatment for low-pressure boilers

• Prevents scale formation

• Controls and maintains pH hardness

• Easy to use & easy to dose

APPLICATIONS: BWT ONE SHOT is suitable for use with all auxiliary boilers including waste heat and exhaust gas boilers. BWT ONE SHOT prevents scale formation.

DIRECTIONS FOR USE: For optimum results, BWT ONE SHOT should be dosed directly into the boiler via a by-pass pot feeder installed in the boiler feed line.

For low-pressure boilers without by-pass feeder, the product may be dosed into the hot well. But we do not advise this as a long-term solution. Regular blowdown is necessary to remove sludge and solids. To treat the boiler correctly, five elements are needed:

1. Alkaline controller and corrosion inhibitor — ALKALINITY CONTROL

2. Scale suppression and prevention — HARDNESS CONTROL

3. Particle removal — LIQUID COAGULANT 4. Oxygen scavenging 5. Condensate conditioning or neutralising

CONDENSATE TREATMENT BOILER TREAT ONE SHOT has two elements of treatment:

1. Alkaline controller and corrosion inhibitor

2. Scale suppression and prevention For good boiler water treatment, we strongly advise using OXYGEN SCAVENGER and CONDENSATE TREATMENT, or CONDENSATE CONTROL, for neutralising acids in the condensate system.

INITIAL DOSAGE:

Initial dose for untreated system is 1 L of BWT ONE SHOT per 1000 L of water. Maintenance dosages are determined by the result of P-alkalinity. Analysis is carried out using SHERAN CHEMICALS boiler water test kits

Datasheet